Chicago™ Grip for EHS Cable, Curved Jaw
1684-74
- When pulling the EHS (extra-high-strength) galvanised-steel cable, the galvanised surface has a tendency to coat the jaws of any grip, causing the cable to slip
- To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double 'V' contour
- For use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand.
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
- Made in the USA
Designed for use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand. The Chicago-style grip was designed for cable sizes from 0.12'' to 1.0'' (3.10 mm to 25.4 mm). When pulling EHS (extra-high-strength) galvanised-steel cable, the galvanising has a tendency to coat the jaws of any grip, causing the cable to slip. Double 'V' contour reduces the possibility of slippage and damage to the cable.
Specifications
Type:
Chicago Grip
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
N
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V, Milled Curved
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
5.6 lb (2.6 kg)
UPC:
092644471728
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.